CTS RWD V6-3.6L (2008)
3. Install the yoke to the shock.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
4. Install the yoke to shock retaining bolt and nut.
*
Tighten the shock to yoke nut to 90 N.m (66 lb ft).
*
Tighten the yoke to lower control arm nut to 180 N.m (133 lb ft).
5. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair) .
6. Lower the vehicle.