CTS RWD V8-6.2L SC (2009)
9. Install the power vacuum brake booster pushrod nut (1) and tighten to 9 Nm (80 lb in).
10. Connect the brake pedal position sensor (1) electrical connector.
11. Install the steering column. Refer to Steering Column Replacement (See: Steering and Suspension/Steering/Steering Column/Service and
Repair/Steering Column Replacement).
12. Install the power vacuum brake booster. Refer to Power Vacuum Brake Booster Replacement (LHD) (See: Power Brake Assist/Vacuum Brake
Booster/Service and Repair/Power Vacuum Brake Booster Replacement (LHD))Power Vacuum Brake Booster Replacement (RHD) (See: Power
Brake Assist/Vacuum Brake Booster/Service and Repair/Power Vacuum Brake Booster Replacement (RHD)).
13. Calibrate the brake pedal position sensor. Refer to Brake Pedal Position Sensor Calibration (See: Lighting and Horns/Brake Light Switch/Service
and Repair/Brake Pedal Position Sensor Calibration).