CTS RWD V8-6.2L SC (2009)
8. Separate the EBCM (1) from the brake pressure modulator valve (BPMV).
Installation Procedure
1. Clean the sealing surfaces of the BPMV and the EBCM.
2. Install the EBCM (1) to the BPMV.
8. Separate the EBCM (1) from the brake pressure modulator valve (BPMV).
Installation Procedure
1. Clean the sealing surfaces of the BPMV and the EBCM.
2. Install the EBCM (1) to the BPMV.