CTS RWD V8-6.2L SC (2009)
5. Connect the surge tank inlet hose to the radiator. Use J 38185 to position the hose clamp to secure the hose.
6. Install the radiator/condenser upper support.
7. Install the radiator support brackets.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
8. Install the radiator support bracket bolts and tighten to9 Nm (80 lb in).
9. Raise and support the vehicle.
10. Connect the lower retainer pins of the side air baffle to the radiator.