CTS RWD V8-6.2L SC (2009)
4. Connect the condenser tube (2) to the condenser.
5. Connect the condenser tube to the fan shroud retainer clip.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
6. Install the condenser tube to condenser retaining bolt (1) and tighten to9 Nm (80 lb in).
7. Install the front air deflector. Refer to Front Bumper Fascia Air Deflector Replacement (See: Body and Frame/Bumper/Front Bumper/Front
Bumper Cover / Fascia/Service and Repair/Front Bumper Fascia Air Deflector Replacement).
8. Lower the vehicle.
9. Install the A/C quick connect fitting at the liquid line. Refer to Air Conditioning Line/Tube Connector Removal/Replacement (See: Air
Conditioning Line/Tube Connector Removal/Replacement).
10. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (See: Filters/Air Cleaner Housing/Service and Repair).
11. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging (See: Heating and Air Conditioning/Service and
Repair/Refrigerant Recovery and Recharging).
12. Using J 39400-A - Halogen Leak Detector , leak test the fittings of the component.