CTS RWD V8-6.2L SC (2009)
5. Install the EVAP hose to the fuel filter bracket:
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
6. Install the fuel filter bracket bolt and tighten to 9 Nm (80 lb in).
7. Install the fuel/brake bundle to the underbody.
8. Complete the following in order to install the chassis hose/pipes to the retainers (2) located at the rearward portion of the rail:
1. Install the chassis hose/pipes into the retainers (2).
2. Close the retainers (2) at the top.
3. Insert the retainers (2) into the rail.
9. Install the chassis hose/pipes into the retainers (1) located at the forward portion of the rail.
10. Close the retainers.