CTS RWD V8-6.2L SC (2009)
Clutch Release Fork: Service and Repair
Clutch Return Spring Replacement
Removal Procedure
1. Remove the closeout/insulator panel. Refer to Instrument Panel Insulator Replacement - Left Side (Left Hand Drive) (See: Body and
Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair)Instrument Panel Insulator Replacement - Left Side (Right
Hand Drive) (See: Instrument Panel, Gauges and Warning Indicators).
2. Disconnect the clutch master cylinder push rod from the clutch pedal pin.
3. Carefully bend the clutch spring retaining tab (1) to the side only far enough to provide clearance for clutch spring removal.
4. Remove the clutch pedal return spring from the clutch pedal assembly as follows: