CTS Sedan AWD V6-3.0L (2010)
6. Install the wiring harness to the side of the camshaft cover.
7. Connect the ignition coil electrical connectors.
8. Install the upper intake manifold with the lower intake manifold. Refer to Lower Intake Manifold Replacement (LP1, LY7) (See: Intake
Manifold/Service and Repair/Intake Manifold Replacement).
9. Install the engine cover. Refer to Fuel Injector Sight Shield Replacement (LP1, LY7) (See: Powertrain Management/Fuel Delivery and Air
Induction/Fuel Injector/Service and Repair/Fuel Injector Sight Shield Replacement)Fuel Injector Sight Shield Replacement (LLT) (See:
Powertrain Management/Fuel Delivery and Air Induction/Fuel Injector/Service and Repair/Fuel Injector Sight Shield Replacement).
