CTS Sedan AWD V6-3.0L (2010)
1. Install the wheel bearing/hub.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the wheel bearing/hub mounting bolts and tighten to 135 Nm (100 lb ft).
3. Install the wheel speed sensor. Refer to Front Wheel Speed Sensor Replacement (RWD) (See: Brakes and Traction Control/Antilock Brakes /
Traction Control Systems/Wheel Speed Sensor/Service and Repair/Front Wheel Speed Sensor Replacement)Front Wheel Speed Sensor
Replacement (AWD) (See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Wheel Speed Sensor/Service and
Repair/Front Wheel Speed Sensor Replacement).
4. Install the NEW wheel driveshaft nut and washer.
*
For the left side, refer to Front Wheel Drive Shaft Replacement - Left Side (See: Transmission and Drivetrain/Drive Axles, Bearings and
Joints/Axle Shaft Assembly/Service and Repair).
*
For the right side, refer to Front Wheel Drive Shaft Replacement - Right Side (See: Transmission and Drivetrain/Drive Axles, Bearings and
Joints/Axle Shaft Assembly/Service and Repair).
5. Install the front brake rotor. Refer to Front Brake Rotor Replacement (JE5, J55 (RWD)) (See: Brakes and Traction Control/Disc Brake
System/Brake Rotor/Disc/Service and Repair/Removal and Replacement/Front Brake Rotor Replacement (JE5, J55))Front Brake Rotor
Replacement (JE5, J55 (AWD)) (See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and Repair/Removal and
Replacement/Front Brake Rotor Replacement (JE5, J55))Front Brake Rotor Replacement (J56) (See: Brakes and Traction Control/Disc Brake
System/Brake Rotor/Disc/Service and Repair/Removal and Replacement/Front Brake Rotor Replacement (J56)).
6. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Service and Repair).
7. Lower the vehicle.