CTS Sedan AWD V6-3.0L (2010)
Installation Procedure
Note: Ensure clearance is maintained between the transmission and the following:
*
The wiring harness
*
The vent tube
*
The cooler pipes
1. Using the transmission jack, carefully raise the transmission to the engine.
2. Align the transmission with the engine dowels.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the transmission mounting bolts and tighten to 50 Nm (37 lb ft).
4. Install the transfer case. Refer to Transfer Case Assembly Replacement (See: Transmission and Drivetrain/Transfer Case/Service and
Repair/Removal and Replacement/Transfer Case Assembly Replacement).