CTS Sedan AWD V6-3.0L (2010)
6. Inspect the fill plug washer (2) and replace if necessary.
Caution: Refer to Component Fastener Tightening Caution (See: Service Precautions/Vehicle Damage Warnings/Component Fastener
Tightening Caution).
7. Install the transmission fill plug (1) and washer (2) then tighten to 37 Nm (27 lb ft).
8. Lower the vehicle.
Transmission Fluid Replacement
Transmission Fluid Replacement
Draining Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Clean away any dirt and debris from around the transmission fluid drain plug area.