CTS Sedan RWD V8-6.2L SC (2010)
12. Remove the 2 fasteners (4 and 6) from the reservoir inlet hose (1).
13. Remove the reservoir inlet hose from the vehicle.
Installation Procedure
1. Position the reservoir inlet hose (1) in the vehicle.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the 2 fasteners (4 and 6) to the reservoir inlet hose and tighten to 9 Nm (80 lb in).