CTS Wagon AWD V6-3.6L (2010)
9. Pivot the brake caliper upward and support with heavy mechanics wire or equivalent.
10. Remove the inner brake pad (1).
11. Remove the outer brake pad (2).
12. Remove the brake pad springs.
Installation Procedure
1. Inspect the brake caliper guide pins, seals and brake pad springs for damage and/or corrosion. Refer to Front Disc Brake Mounting and Hardware
Inspection (See: Testing and Inspection/Front Disc Brake Mounting and Hardware Inspection).
2. Install the brake pad springs.
3. Install the inner brake pad (1).
4. Install the outer brake pad (2).
5. Pivot the brake caliper into position.
Note: If reusing the brake caliper guide pin bolt, the threads of the brake caliper guide pin bolt and the threads of the guide pin must be free of
residue and debris prior to application of threadlocker in order to ensure proper adhesion and fastener retention.