CTS Wagon RWD V6-3.6L (2010)
1. Install a NEW camshaft cover seal and NEW grommets.
2. Install the camshaft cover. Refer to Camshaft Cover Installation - Left Side (See: Service and Repair/Overhaul/128. Camshaft Cover Installation -
Left Side).
3. Install the ignition coils (2).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Install the ignition coil bolts (1) and tighten to 10 Nm (89 lb in).