CTS Wagon RWD V6-3.6L (2010)
Camshaft: Service and Repair
Camshaft Position Actuator Replacement - Bank 1 (Right Side) Intake
Camshaft Position Actuator Replacement - Bank 1 (Right Side) Intake
Removal Procedure
1. Remove the right exhaust camshaft actuator. Refer to Camshaft Position Actuator Replacement - Bank 1 (Right Side) Exhaust (See: Camshaft
Position Actuator Replacement - Bank 1 (Right Side) Exhaust).
2. Remove the intake camshaft position actuator bolt.
3. Remove the right intake camshaft position actuator.
Installation Procedure
1. Locate the intake camshaft position actuator to the camshaft and loosely install the bolt.