CTS Wagon RWD V6-3.6L (2010)
4. Connect the reverse lockout solenoid electrical connector (5).
5. Install the transmission mount. Refer to Transmission Rear Mount Replacement (See: Transmission and Drivetrain/Manual
Transmission/Transaxle/Transmission Mount/Service and Repair/Tremec 6-Speed - Manual Transmission).
6. Install the transmission support. Refer to Transmission Support Replacement (Manual except CTS-V) (See: Body and
Frame/Frame/Cross-Member/Rear Cross-Member/Service and Repair)Transmission Support Replacement (Automatic RWD except CTS-V) (
See: Body and Frame/Frame/Cross-Member/Rear Cross-Member/Service and Repair)Transmission Support Replacement (Automatic CTS-V) (
See: Body and Frame/Frame/Cross-Member/Rear Cross-Member/Service and Repair)Transmission Support Replacement (Manual CTS-V) (See:
Body and Frame/Frame/Cross-Member/Rear Cross-Member/Service and Repair)Transmission Support Replacement (Automatic AWD) (See:
Body and Frame/Frame/Cross-Member/Rear Cross-Member/Service and Repair).
7. Remove the transmission jack.
8. Install the exhaust system. Refer to Exhaust System Replacement (LSA) (See: Engine, Cooling and Exhaust/Exhaust System/Service and
Repair/Exhaust System Replacement)Exhaust System Replacement (LF1) (See: Engine, Cooling and Exhaust/Exhaust System/Service and
Repair/Exhaust System Replacement)Exhaust System Replacement (Single) (See: Engine, Cooling and Exhaust/Exhaust System/Service and
Repair/Exhaust System Replacement (Single))Exhaust System Replacement (LLT) (See: Engine, Cooling and Exhaust/Exhaust System/Service
and Repair/Exhaust System Replacement).
9. Lower the vehicle.