CTS Wagon RWD V6-3.6L (2010)
1. Install the clutch slave cylinder and bolts (3).
Tighten the clutch actuator cylinder bolts (3) to 10 Nm (115 lb in).
2. Connect the pipe fitting (1) to the clutch slave cylinder.
Tighten the pipe fitting (1) to 13 Nm (88 lb in).
3. Install the manual transmission to the vehicle. Refer to Transmission Replacement (See: Manual Transmission/Transaxle/Service and
Repair/Removal and Replacement/Tremec 6-Speed - Manual Transmission/Transmission Replacement).
