DeVille V8-4.6L VIN Y (1998)
Ash Tray: Service and Repair
Ashtray Replacement W/O RPO D55
REMOVAL PROCEDURE
1. Open the ashtray.
2. Remove the 4 fasteners (10) that retain the ashtray (9) to the instrument panel. Partially remove the ashtray.
3. Disconnect the electrical connector. Remove the ashtray.
INSTALLATION PROCEDURE
1. Partially install the ashtray. Connect the electrical connector.
2. Align the ashtray (9) to the instrument panel.
NOTE: Refer to Fastener Notice in Cautions and Notices.
Install the ashtray fasteners (10).
Tighten
Tighten the fasteners to 1.6 N.m (14 lb in).
3. Close the ashtray.