DeVille V8-4.6L VIN Y (1998)
Trim Panel: Service and Repair
Move to Door Panel
Side Front Door Trim Panel
TOOLS REQUIRED
J 42983 Door Trim Pad Hook Repair Kit
CAUTION: Striking the vehicle near the side air bag impact sensor can cause an air bag deployment if the ignition switch is not OFF. To help
avoid personal injury and damage to the vehicle from a deployment, always turn the ignition switch to OFF during body repairs.
1. Remove the power window switch assembly.
2. Remove the door trim plate.
3. Gently pull the trim panel inboard in order to disengage the trim fastener retaining the outside rearview mirror trim cover.
4. Remove the fasteners.
5. Remove the door trim panel (5) by lifting up and out in order to disengage the hooks from the door.
CAUTION: Refer to SIR Handling Caution in Cautions and Notices.
6. Disable the SIR system. Refer to Disabling the SIR System in Restraints.
7. Disconnect the electrical connectors (3).
INSTALLATION PROCEDURE
1. Connect the electrical connectors.
2. Enable the SIR system.
3. Perform the following steps in order to install the door trim panel (1):
3.1. Align the hooks with the door.
3.2. Push inward and downward on the trim panel.
