DeVille V8-4.6L VIN Y (1998)
4. Tap in the pins to retain the reservoir. Be careful not to damage the reservoir or master cylinder. If the strut cross bar had been loosened or
removed, reinstall it.
Fill the master cylinder reservoir to the full level mark using only Delco Supreme II (GM P/N 12377967) Brake Fluid, or equivalent DOT-3 brake
fluid, as specified in Maintenance and Lubrication.
5. Connect the electrical connector to the fluid level sensor.
6. Bleed the hydraulic system.
7. Recheck the fluid level in the reservoir.