DeVille V8-4.6L VIN Y (1998)
55.
Lubricate the silicone seal in the oil distribution plate. With a twisting motion install the end of the oil suction tube (2).
56.
Install the oil suction tube retaining bolt (1) and nut (3).
Tighten
^
Tighten the oil suction tube support bracket nut to 24 N.m (18 lb-ft).
^
Tighten the oil suction tube bolt to 10 N.m (89 lb in).
57.
Using a suitable cleaning solvent clean the sealing surfaces and seal groove of the oil pan.
58.
Using a suitable cleaning solvent clean the sealing surfaces of the oil distribution plate.
59.
Completely fill and slightly overfill the oil pan seal groove with a continuous bead of RTV sealant P/N 12378521 (in Canada use P/N 88901148)
or P/N 88861417 (in Canada use 88861418).