cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Water Pump|Service and Repair|Page 2798 > < Thermostat, Engine Cooling|Specifications|Page 2794
Page 1
background image

Water Pump: Service and Repair

Water Pump Assembly

Water Pump Fasteners

REMOVE OR DISCONNECT

1. Drain cooling system.
2. Coolant recovery tank.
3. Water pump pulley (three bolts). Apply tension to drive belt to keep pulley from rotating by forcing the belt tensioner into the drive belt with a

breaker bar.

4. Accessory drive belt.
5. Water pump from vehicle.
6. Water pump gasket and discard.
7. Clean water pump and engine front cover sealing surfaces.

INSTALL OR CONNECT

1. New gasket on water pump cover studs.
2. Water pump and tighten all pump mounting bolts to the torque specifications.
3. Water pump pulley; install bolts finger-tight.

Water Pump|Service and Repair|Page 2798 > < Thermostat, Engine Cooling|Specifications|Page 2794