DeVille V8-4.9L VIN B (1995)
1. Position engine mount and bracket, Figure 4, in place between cylinder block and frame. Secure bracket to block with one stud and two bolts.
Tighten to 46 Nm (34 lbs. ft.)
2. Position transaxle mount and bracket, Figure 4, in place between transaxle and frame. Secure bracket to transaxle with two bolts. Tighten to 46
Nm (34 lbs. ft.)
Important Guide motor mount into location while lowering engine.
3. Lower engine.
4. Engine mount to frame and transaxle mount to frame bracket with two nuts each. Tighten to 31 Nm (22 lbs. ft.)
5. Two nuts to engine mount studs and two nuts to transaxle mount studs. Tighten to 31 N.m (22 lbs. ft.)
