cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Evaporator Core Installation|Page 8720 > < Evaporator Core Installation|Page 8718
Page 1
background image

Evaporator Core: Service and Repair
Evaporator Core Removal

Remove or Disconnect

1. Recover refrigerant.
2. Negative battery cable.
3. Drain Radiator.
4. Right side sound insulator.
5. Glove box.
6. Electrical connectors, vacuum connector and programmer.
7. Loosen Instrument Panel (I/P) brace.
8. Bolt securing evaporator core housing to front of dash (bolt is located above carpet directly behind left side of console).
9. Heater core.

10. Cross car brace.
11. Vapor (evaporator/accumulator) line.
12. Liquid line from evaporator.
13. Two bolts securing harness pass-through to front of dash.
14. Electrical connectors:

^

Oxygen sensor, blower motor, A/C high and low pressure temperature sensors, A/C fan switch, and A/C low pressure switch.

15. Ignition Control Module.
16. Coolant bypass hose from coolant tank.
17. Air filter housing and PCV valve.
18. Left hand radiator core support and radiator shroud.
19. Electrical connectors:

Evaporator Core Installation|Page 8720 > < Evaporator Core Installation|Page 8718