cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Sunroof / Moonroof Switch > < Sunroof - Track/Motor Synchronization Revision|Page 14261
Page 2
background image

1.

Connect the electrical connectors (3) to the sunroof motor (1). Do not install the sunroof motor at this time.

2.

If installing a new replacement sunroof motor, proceed to Step 3.

Hold the sunroof switch in the closed position until the sunroof motor stops. The sunroof electronics will automatically stop the sunroof motor at
the fully closed and flush position.

3.

Manually close the sunroof glass panel if unable to close before sunroof motor removal.

3.1.

Slide the sunroof glass panel forward.

3.2.

Seat the rear of the glass panel by pushing upward at the rear of the glass panel.

4.

Install the sunroof motor (1) to the sunroof module (2).

Notice:

Refer to the Fastener Notice in the Cautions and Notices sub-section of the Service Manual.

5.

Install the fasteners in order to secure the sunroof motor to the sunroof module.

Tighten

Tighten the fasteners to 5 N-m (44 lb in).

6.

Check the glass fit to the roof opening. Refer to Sunroof Glass Height and Opening Fit Adjustment.

7.

Install the headliner.

Refer to Headliner Replacement in the Interior Trim sub-section.

Sunroof / Moonroof Switch > < Sunroof - Track/Motor Synchronization Revision|Page 14261