DeVille DHS V8-4.6L VIN Y (2000)
Rear Seat Heat Element Locations
Correction
1.
If replacement of the front/rear seat back heat element is indicated after performing the standard diagnostic procedures:
^
Install a new seat back heat element between the existing seat trim cover heat element and the foam pad.
^
Refer to the Heat Element (Heater) Installation Procedure in this bulletin.
2.
If replacement of the front/rear seat cushion heat element is indicated after performing the standard diagnostic procedures:
^
On DTS & DHS models: Determine if one or more of the 3 heat elements is non-functional.
^
Install a new seat cushion heat element(s) between the existing seat trim cover heat element and the foam pad.
^
Refer to the Heat Element (Heater) Installation Procedure in this bulletin.
Heater Element (Heater) Installation Procedure