DeVille DHS V8-4.6L VIN Y (2000)
Position the bracket, mount and shield onto the vehicle.
Install the two upper bracket bolts.
Install the support brace.
Install the support brace bolt
Install the two lower bracket nuts. Tighten the bolts in the following sequence
Tighten
Tighten the two lower engine mount bracket nuts to 41 N.m(30 lb ft).
Tighten the transaxle support brace bolt to 50 N.m(37 lb ft).
Tighten the two upper engine mount bracket bolts to 50 N.m(37 lb ft).
Using the adjustable support, position the frame into place. Ensure that the front mount is correctly positioned in the frame. Install the two frame mount
bolts.
Tighten
Tighten the retainers to 191 N.m(141 lb ft). Install the front engine mount to frame nut.
Tighten
Tighten the fastener to 70 N.m (52 lb ft).
Remove the two adjustable supports
Install the front air deflector.
Lower the vehicle.