DeVille DHS V8-4.6L VIN Y (2000)
Control Assembly: Description and Operation
Blower Control Module Description
The blower control module is a solid state device that operates the blower motor. The blower control module outputs a voltage that varies between 0
Volts when the blower motor is OFF and a maximum blower speed of 12 Volts.
The blower control module receives the requested blower speed from the Instrument Panel Module (IPM) in the form of a 5 Volt pulse modulated
reference signal. When low speed is requested by the IPM, the pulse width is reduced. When high blower speed is requested, the pulse width is
increased.