DeVille DHS V8-4.6L VIN Y (2000)
Control Assembly: Service and Repair
Control Assembly Replacement
REMOVAL PROCEDURE
1. Remove the instrument panel center trim plate (1).
2. Depress and hold the locking tabs, located on the 4 corners of the HVAC control assembly.
Pull the HVAC control away from the instrument panel (IP).
3. Disconnect the electrical connectors from the HVAC control.
4. Remove the HVAC control assembly (1) from the instrument panel.
INSTALLATION PROCEDURE
1. Connect the HVAC electrical connectors.
2. Install the HVAC control assembly (1) into the IP.
Push the HVAC control assembly (1) into the IP opening in order to engage the retainers.
