DeVille DHS V8-4.6L VIN Y (2000)
Driver/Vehicle Information Display: Description and Operation
Driver Information Center (DIC) Or Message Center Description
DRIVER INFORMATION CENTER
The driver information center (DIC) is used to display alpha-numeric information to the driver and provide a method of displaying select vehicle
information upon request. The DIC is a one line, 22 character, vacuum fluorescent (VF) display.
DIC SWITCHES
There are 6 DIC switches, 3 switches on each side of the instrument cluster (IPC).
ENG/MET
The ENG/MET button is the left button of the LH DIC switch. The button is used in order to change the instrument cluster and DIC displays between
english and metric units.
DSPL MODE
The DSPL MODE button is the middle button of the LH DIC switch. The button is used in order to change the instrument cluster display.
^
Analog (UY9) - The IPC display has 3 different states.
-
IPC gauges
-
IPC gauges and digital speed display
-
Digital speed display
^
Digital (U02) - The fuel level and engine coolant temperature displays turn on and off.
TRIP (RESET and A/B)
The TRIP button is the right button of the LH DIC switch. The button consists of 2 switches:
^
TRIP RESET - The top of the TRIP button is used in order to reset the displayed trip odometer to zero.
^
TRIP NB - The bottom of the TRIP button is used in order to change the trip odometer between trip A and trip B.
INFO (UP AND DOWN)
The INFO button is the left button of the RH DIC switch. The button consists of 2 switches:
^
INFO Up - The top of the INFO button is used in order to scroll to the next DIC display parameter.
^
INFO Down - The bottom of the INFO button is used in order to scroll to the next DIC display parameter.
INFO RESET
The INFO RESET button is the middle button of the RH DIC switch. The button is used in order to acknowledge DIC messages, clear the timer, and
reset various DIC functions. The button will acknowledge the currently displayed DIC message or reset the currently displayed DIC parameter.
ON/OFF
The ON/OFF button is the right button of the RH DIC switch. The button for the 2 following functions:
^
Feature Programming - Turn the currently displayed parameter on and off.
^
Timer - Start and stop the timer.