DeVille DHS V8-4.6L VIN Y (2000)
6. Remove the idle air control valve from the throttle body.
7. Remove the idle air control valve O-ring.
INSTALLATION PROCEDURE
1. Install the new idle air control O-ring on the valve.
2. Install the idle air control valve (1) into the throttle body.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the idle air control valve attaching screws (2).
Tighten
Tighten the idle air control valve attaching screws to 3.0 N.m (27 lb in).