DeVille DHS V8-4.6L VIN Y (2000)
18. Connect the module (1) to the adapter (2) on the SIR deployment harness (3).
19. Firmly seat the adapter into the module connector.
20. Clear the area of people.
CAUTION: Refer to Inflator Module Deployment Outside vehicle Caution In Service Precautions.
21. Separate the two banana plugs on the SIR deployment harness.
IMPORTANT:
^
The rapid gas expansion involved with deploying an air bag is very loud. Notify all the people in the immediate area that you intend to deploy the
inflator module.
^
When the air bag deploys, the SIR deployment fixture may jump vertically. This is a normal reaction of the inflator module to the force of the
rapid gas expansion inside the air bag.
22. Connect the SIR deployment harness wires to the power source.
