DeVille DHS V8-4.6L VIN Y (2000)
16. Connect the seat belt pretensioner (1) to the adapter (2) on the SIR deployment harness (3).
17. Firmly seat the adapter into the seat belt pretensioner connector.
18. Clear the area of people.
CAUTION: When you are deploying a pretensioner for disposal, perform the deployment procedures In the order listed. Failure to follow
the procedures in the order listed may result In personal Injury.
19. Separate the 2 banana plugs on the SIR deployment harness.
IMPORTANT: The rapid gas expansion involved with deploying a pretensioner is very loud. Notify all the people in the immediate area that you
intend to deploy the seat belt pretensioner.
20. Connect the SIR deployment harness wires to the power source.
21. Disconnect the SIR deployment harness from the power source after the pretensioner deploys.
