DeVille DHS V8-4.6L VIN Y (2000)
1. Loosely install the stabilizer link insulators, washers, nut and bolt.
Tighten the stabilizer link nut to 17 Nm (13 ft. lbs.).
2. Install the front wheels and tires.
Tighten the wheel nuts to 125 Nm (80 ft. lbs.).
3. Lower the vehicle.
With RPO FE7
Removal Procedure
1. Raise the vehicle and support by the frame allowing the control arms to hang free. Refer to Vehicle Lifting.
2. Remove the wheels and tires. Refer to Tire and Wheel Removal and Installation in Wheels, Tires and Alignment.
3. Remove the stabilizer link bolts.
4. Remove the stabilizer link.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.