DeVille DHS V8-4.6L VIN Y (2000)
8. Remove two bolts at the body mount.
9. Remove the rear body mount.
Installation Procedure
1. Install the rear body mount.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the bolts securing the body mount.
Tighten the bolts to 77 Nm (57 ft. lbs.).
3. Raise the support assembly.
4. Install the two rear bolts securing the support assembly to the vehicle body.
Tighten the bolts to 207 Nm (153 ft. lbs.).
