DeVille DHS V8-4.6L VIN Y (2000)
Output Shaft: Service and Repair
Removal
1. Remove the differential carrier. Refer to Differential Carrier Replacement.
2. Remove the left drive axle.
3. Push on the output shaft in order to expose the snap ring. Remove the output shaft snap ring (56).
4. Remove the left side differential gear (118). Remove the thrust washer (117).
5. Remove the output shaft (57) through the opposite end of the case.
Installation
1. Inspect the output shaft (57) splines for burrs or damage. Inspect the snap rings (56) for overexpansion.