DeVille DHS V8-4.6L VIN Y (2000)
Torque Converter Cover: Service and Repair
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Support the vehicle on safety stands.
3. Remove the attaching bolts (5) and the engine-to-transmission brace.
4. Remove the torque converter cover.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the torque converter cover.
^
Tighten the cover bolt to 12 Nm (106 inch lbs.).
2. Install the engine-to-transmission brace and attaching bolts (5).
^
Tighten the bolts to 47 Nm (35 ft. lbs.).
3. Remove the safety stands.
4. Lower the vehicle.
