DeVille DHS V8-4.6L VIN Y (2000)
10. Remove the halfshaft bar retaining ring from the groove (5) on the halfshaft bar.
11. Slide tripot joint spider assembly (2) off of the halfshaft bar.
12. Clean the following items with cleaning solvent:
^
The tripot balls
^
The needle rollers
^
The housing
13. Remove all traces of old grease and any contaminates. Dry all parts.
14. Inspect the following parts for damage or wear:
^
The halfshaft inboard boot (4)
^
The tripot joint spider assembly (2)
^
The housing (1)
^
The trilobal tripot bushing (3)
^
The needle rollers
Assembly Procedure
^
Tools Required
-
J35910 Seal Clamp Tool
-
J35566 Earless Seal Clamp Tool
-
J8059 Snap Ring Pliers