DeVille DTS V8-4.6L VIN 9 (2002)
*
The upper insulator (2)
*
The spacer (1)
2. Lower the body to the frame.
3. Install the lower insulator (3).
4. If the frame insulator bolt does not screw in smoothly, run a tap through the cage in the body in order to remove the foreign material. Ensure that
the tap does not punch through the underbody. Position the insulator and the metal washer in order to prevent contact with the frame rail. Do not
over tighten the insulator nut. Overtightening the nut may strip the cage nut.
Notice: Refer to Fastener Notice in Cautions and Notices.
5. Install the following components:
*
The retainer (4)
*
The bolt (6)
Tighten the insulator bolts to 191 N.m (141 lb ft).
*
Install the front air deflector. Refer to Air Deflector Replacement - Front (See: Spoilers, Flaps, and Air Dams/Air Dam/Service and Repair) in
Body Front End.