DeVille DTS V8-4.6L VIN 9 (2002)
Headliner: Service and Repair
Headliner Replacement - Cardboard Insulator
Headliner Replacement - Cardboard Insulator
Removal Procedure
1. Remove the headliner. Refer to Headliner Replacement (w/CF5) (See: Headliner Replacement (w/CF5))Headliner Replacement (w/o CF5) (See:
Headliner Replacement (w/o CF5)) .
Notice: Use care when removing the cardboard roof insulator. Excessive pressure can cause dents in the roof panel.
2. Starting in one corner of the cardboard, pulling downward, cut the adhesive beads using a sharp putty knife or equivalent.
3. Cut off all of the adhesive beads.
4. Remove the cardboard roof insulator.
Installation Procedure
Important:
*
Installation of a new cardboard roof insulator is necessary to ensure the structural integrity of the roof system. Use GM P/N 12378192
Adhesive available through General Motors Service Parts Operations.
*
The cardboard roof insulator must be installed within five minutes of adhesive application.
1. Apply 6 mm (1/4 in) to 9 mm (3/8 in) beads (1) of adhesive 15 mm (5/8 in) wide (2).
2. Apply the adhesive (1) in the locations marked on the cardboard insulator.
