DeVille DTS V8-4.6L VIN 9 (2002)
16. Install the secondary camshaft drive chain tensioner or release the tension on the shoe.
^
Tighten the secondary camshaft drive chain tensioner bolts to 25 Nm (18 ft. lbs.).
^
Tighten the camshaft sprocket bolts to 120 Nm (89 ft. lbs.).
Important: The RE camshaft sprocket must contain the camshaft position sensor pick-up.
17. Route the secondary drive chain for the right side cylinder head over the outer row of the intermediate shaft teeth and repeat steps 11 through 15
for right side camshafts. Right side camshaft sprockets are identified as RI (right intake) and RE (right exhaust). In addition the RE sprocket must
contain the camshaft position sensor pickup.
18. Ensure all timing marks are properly aligned.
19. Install the following components:
^
The oil pump.
^
The engine front cover.
