DeVille DTS V8-4.6L VIN 9 (2002)
12. Position the surge tank pipe (2) on to the fuel rail studs.
13. Position the engine coolant heater wire (1) on to the fuel rail studs (if equipped).
14. Install the 2 push nuts.
15. Install the fuel rail bracket retaining nut (1) to the rear lift bracket.
^
Tighten the fuel rail bracket retaining nut (1) to 10 Nm (89 inch lbs.).
16. Install the quick connect fittings to the fuel rail.
17. Connect the vacuum tubes (2) to the AIR solenoid.
18. Connect the fuel regulator vacuum tube (1).