DeVille DTS V8-4.6L VIN 9 (2002)
The DIM will enter a sleep state when all of the following conditions exist:
^
Ignition switch is OFF.
^
No activity exists on the class 2 serial data line.
^
No outputs are commanded.
^
No delay timers are actively counting.
^
No wake-up inputs are present.
If all these conditions are met the DIM will enter a low power or sleep condition. This condition indicates that the DIM, which is the PMM of the
vehicle, has sent an OFF-ASLEEP message to the other systems on the serial data line.