DeVille DTS V8-4.6L VIN 9 (2002)
9. Remove the accumulator.
10. Remove the electrical harnesses from the fuse block base.
11. Remove the fasteners (1) that secure the fuse block base to the body.
12. Remove the fuse block base from the vehicle.
INSTALLATION PROCEDURE
1. Install the underhood fuse block base to the body.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the fuse block base fasteners (1).
Tighten
Tighten the fasteners (1) to 9 N.m (80 lb in).
3. Install the accumulator.
4. Install the wiring harnesses to the fuse block base.