DeVille DTS V8-4.6L VIN 9 (2002)
Steering Gear: Service and Repair
Rack and Pinion Boot Replacement - On Vehicle
Rack and Pinion Boot Replacement - On Vehicle
^
Tools Required
-
J 22610 Keystone Clamp Pliers
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the outer tie rod.
4. Remove the hex jam nut (2) from the inner tie rod assembly.
5. Remove the tie rod end clamp (2) from the rack and pinion boot (1).
6. Remove the rack and pinion boot clamp from the rack and pinion boot.
7. Remove the rack and pinion boot from the rack and pinion gear assembly.