DeVille DTS V8-4.6L VIN 9 (2002)
Windshield Washer Reservoir: Service and Repair
Washer Solvent Container Level Sensor Replacement
REMOVAL PROCEDURE
1. Remove the right front fascia extension (2) in order to access the washer solvent container level sensor.
2. Disconnect the electrical connector from the washer solvent level sensor.
3. Using a flat-bladed tool, gently pry upward on the lower edge of the level sensor between the sensor and grommet.
4. Remove the washer solvent level sensor from the washer solvent container.
5. Remove the grommet and discard.
INSTALLATION PROCEDURE