Escalade ESV RWD V8-6.2L (2010)
Note:
*
If installing the original brake pads and retaining springs, mark the position of the pads and springs for proper assembly.
*
DO NOT reuse the old brake pad retaining springs with new brake pads. Replace with NEW only.
10. Remove the brake pads from the caliper bracket.
11. Remove the retaining springs.
12. Remove the brake caliper bracket bolts.
13. Remove the brake caliper bracket.
14. Remove any contaminants or foreign material from the inside ends of the brake caliper bracket.
15. Clean the mounting surface and threads of the brake caliper bracket.
Installation Procedure