Escalade ESV RWD V8-6.2L (2010)
8. Connect the brake master cylinder primary brake pipe fitting (1) and tighten to 30 Nm (22 lb ft).
9. Connect the brake master cylinder reservoir return hose quick connect (1).
10. Connect the brake master cylinder reservoir supply hose quick connect (2).
11. Connect the brake fluid level sensor electrical connector.
12. Fill the brake master cylinder reservoir. Refer to Master Cylinder Reservoir Filling (See: Procedures/Master Cylinder Reservoir Filling).
13. Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding (Manual) (See: Brake Bleeding/Service and Repair)Hydraulic
Brake System Bleeding (Pressure) (See: Brake Bleeding/Service and Repair).
Brake Master Cylinder Reservoir Hose Replacement
Brake Master Cylinder Reservoir Hose Replacement
Removal Procedure
Warning: Refer to Brake Fluid Irritant Warning (See: Service Precautions/Technician Safety Information/Brake Fluid Irritant Warning).
