Escalade ESV RWD V8-6.2L (2010)
![background image](/cadillac/escalade/esv_rwd/v8-6.2l/Page-603002.png)
Caution: All camshaft journals are the same diameter, so care must be used in removing or installing the camshaft to avoid damage to the
camshaft bearings.
5. Install a bolt into the camshaft.
6. Using the bolt as a handle, carefully rotate and pull the camshaft out of the engine block.
7. Clean and inspect the camshaft and bearings. Refer to Camshaft and Bearings Cleaning and Inspection (See: Service and Repair/Overhaul/42.
Camshaft and Bearings Cleaning and Inspection).
Installation Procedure
Note: If camshaft replacement is required, the valve lifters must also be replaced.
1. Lubricate the camshaft journals and the bearings with clean engine oil.
Caution: All camshaft journals are the same diameter, so care must be used in removing or installing the camshaft to avoid damage to the
camshaft bearings.