Escalade ESV RWD V8-6.2L (2010)
Valve Cover: Service and Repair
Valve Rocker Arm Cover Replacement - Right Side
Valve Rocker Arm Cover Replacement - Right Side
Removal Procedure
1. Remove the intake manifold cover. Refer to Upper Intake Manifold Sight Shield Replacement (See: Intake Manifold/Service and Repair/Upper
Intake Manifold Sight Shield Replacement).
2. Remove the connector position assurance (CPA) retainer (2).
3. Disconnect the engine harness electrical connector (1) from the ignition coil wire harness.
4. Remove the engine wiring harness (electronic throttle control branch) clip (6) from the ignition coil bracket stud.
5. Reposition the engine wiring harness (electronic throttle control branch) as necessary.
6. Remove the generator battery cable clip (1) from the ignition coil bracket stud.
7. Reposition the generator battery cable as necessary.